Spout FLEXI, elbow S60

Product information:
Quality FLEXI spout, spout for easier and faster water filling.
With ECO reducer, designed for domestic use (garden). For tanks with valve fi 55-62mm, coarse thread S60x6 (DN50).

Product description:
Thread type: female thread S60x6.
Flexible hose length: 225 mm.
Pipe diameter: approx. 30 mm.
Material: plastic (PE)
Colour: green and white
Sealing foam (PE) on the inside. Excellent sealing and high durability! Please read these warnings/instructions. Remark:

Tanks look the same at first glance, but they differ from each other. The biggest difference is in the valves. The standard and most common outside diameter of the valve is 60 mm. In practice it can vary and is between 55 and 62 mm.
The ECO reducers also used in this article are designed to fit all coarse threads on 60 mm diameter (S60x6) valves. Given the slight differences in "standard" valve threads, the feel of the valve may be different when installed. It may fit perfectly, it may be a little loose or a little tighter. When screwed all the way in, the body is tight and secure.

Tip:
Before installation, make sure that the front of the tank valve (where the actuator is mounted) is smooth and undamaged. New tanks have an aluminium gasket on the valve opening - if this is removed on the surface, this may be the cause of poor sealing of the actuator. Before fitting the actuator for the first time, remove or sand off any imperfections on the valve with sandpaper.
ECO reducers have a harder foam gasket that seals perfectly, even if there are major irregularities in the valve. However, be aware that this can damage the seal, which may affect the seal during the next installation.