TRIO CLASSIC system

Product information:
The system for connecting three IBC tanks is now even more powerful and even cheaper!

The package includes:
3x reducer ECO+ for tanks with valve fi 55-62mm, coarse thread S60x6 (DN50), 2x T-piece F, 3x elbow F, 3x alkaten hose*, tap, reducer

*Alkaten tubes are slightly curved because they are stored on reels. We use LESS alkatene hoses, which are more flexible and much easier to use - you straighten them when installing and they stay in that position.

The connectors are green, as shown in the picture.

The gap between the tanks after installation of the TRIO KLASIK system is between 2 and 6 cm.
Foam gasket (PE).
Excellent sealing and high durability!

The system is available in 1″ (32mm) size.

Options:
TRIO1Metal 3/4″ BR tap* with hose connector.
TRIO2Metal ALU 3/4" tap* with hose nozzle.
TRIO3Metal double 1/2″ PRO tap* with hose connector and "click" spout.
TRIO4Metal double 3/4″ PRO tap* with hose connector and "click" spout.
TRIO5Metal 1″ tap* with hose spigot.
TRIO6Metal 1″ PRO tap* with hose nozzle.
TRIO7aPlastic 3/4″ MF valve* with brass hose nozzle.
TRIO7bMetal 3/4″ PRO valve* with brass hose nozzle.
TRIO8aPlastic 1″ MF valve* with brass hose nozzle.
TRIO8bMetal 1″ PRO valve* with brass hose nozzle.
TRIO9: Brass Y-adapter with two click connectors for garden hose.

*Pipes and valves can be seen in more detail in the pictures above and/or here.

We can also design a system to your specifications. Multiple outlets, a valve to connect a hydrophore, multiple taps, etc... The hydrophore connection is most practical on the right side - because of the direction of opening of the valve handle.

Tip:
We advise that the water is filtered before entering. This will keep the water clean for longer.
You can see the filters here.

Reference:
If you are going to put water into one tank, the other two tanks must be vented to allow the water to flow smoothly through the valves.

There are several ways to do this:
1. If you don't mind water leaking through the lid opening when the tank is filled to the top, you can just unscrew the tank lid slightly - just enough to let air pass through. When the tanks are completely full, the excess water (overflow) will flow out from here.
2. A vented lid works in a similar way - air passes through, but so does water when the tanks are filled to the top.
3. Use the outlet cover and fix the appropriate spout (for the alkaline hose, garden hose, etc.) to it and drain the excess water (overflow) away.
4. You can use a simple vent (use a lid with an outlet or drill a hole in the tank. Connect the garden hose to this outlet. Fix the other end of the hose above the level where the water flows into the tank (e.g. where you have a spigot from the gutter). This way, even when the tanks are full, the water will not leak out and the tank will 'breathe'.

Please contact us for further questions and advice.

Please read the warnings/advice below before installation.
Warning:
Tanks look the same at first glance, but they differ from each other. The biggest difference is in the valves. The standard and most common outside diameter of the valve is 60mm. In practice, it can vary between 55 and 62mm.
All S60 reducers in our range are designed to fit all coarse threads on 60mm diameter valves (S60x6). Due to slight differences in the "standard" valve threads, the feel of the reducer may vary when installed. It may fit perfectly, it may go a little loose or a little tighter. When it is screwed all the way in, it is tight and fixed. All reducers are of proven quality.

Tip:
Before installation, make sure that the cheek of the tank valve (where the reducer is installed) is smooth and undamaged. New tanks have an aluminium seal on the valve opening - if this is superficially removed, it may be the cause of a poor seal of the reducer. Any imperfections on the valve should be removed or sanded with sandpaper before the first installation of the pressure reducer.

The ECO+ reducers used in the TRIO KLASIK systems are extremely durable and have a foam seal. Optionally, a rubber gasket can also be purchased.

For the TRIO KLASIK system, you can also use EXTRA reducers - these are designed for the most demanding users and really extreme conditions.